Modify TL-FO-HD cable to work with TL-RKPS-01

Below are the basic steps to modify the power cable that comes with the TL-FO-HD to work with the TL-RKPS-01.

1. Take the USB cable out of the power supply box and undo the twist tie.
   

   

2. Cut off the USB A (large rectangular side) end.
   

   

3. Carefully cut away the jacket of the cable, then strip about 1/4 inch of the red and black wires.
   

   

4. Insert the red wire into the right side (+) into a 2-pin terminal block for the TL-RKPS-01. Insert the black wire into the left side of the terminal block.
   

   

5. Don't forget to set the voltage output of the TL-RKPS-01 to 5V before connecting the micro USB B end into the TL-FO-HD.